RETURN and ALTERNATIVE INPUT (4)

The ALTERNATIVE INPUT can be used as a rear-side guitar input, which is especially convenient for the Rack, and PowerRack models. The parameter “Input Source” needs to be set accordingly in the Input Section.

The RETURN is available as balanced TRS or XLR input. While it plays a key role during PROFILINGTM , as explained in the chapter Taking a PROFILE, it can also be used in combination with the DIRECT OUTPUT/SEND to loop in external equipment. In combination, RETURN and ALTERNATIVE INPUT can function as a pair of stereo returns. Details can be found in the Effect Loops chapter.

Both the RETURN and the ALTERNATIVE INPUT can also be used as auxiliary inputs. You could, for instance, use this feature to mix in music from your mp3-player and play along. In this case you will need a special cable with 3.5 mm stereo jack on one side and two ¼ inch mono jacks on the other side. You will find the corresponding mix controls in the Output Section.

✓

Please note that the XLR input does not provide phantom power.

-----------------------------------------------------------------------------------------------------------------------------------------------------

 Analog Inputs PROFILER Head, PowerHead, Rack, and PowerRack

Front INPUT: ¼-inch TS unbalanced, dynamic range >108 dB, impedance 1 megohm 

ALTERNATIVE INPUT: ¼-inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohms 

RETURN: XLR balanced, ¼-inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohm

매뉴얼에 이렇게 나와 있다.

드러머 놈이 캠퍼에 후면 인풋이 있다고 올린 사진에는 

spdif와 얼터너티브 인풋에 연결되어 있다. 

얼터너티브 인풋은 mp3나 mr 을 틀기위한 용도고.... 여기에 기타 연결하는 놈은 미친놈이지.

갤럼들아 같잖은 블러핑에 속아서 꼬리 내리지들 마라!